- 69 to 108 N·m across four ratios 51:1 gives 69 N·m peak at up to 77 RPM, 81:1 gives 91 N·m at 48 RPM, 101:1 gives 102 N·m at 40 RPM and 121:1 gives 108 N·m at 30 RPM.
- The lighter of the two 70-frame modules Base build mass is 0.9 kg against 1.27 kg for the CRA-RI70-90, on identical torque, speed and electrical ratings.
- 500 W electrical platform All builds run from 24–48 V at 6.1 A rated and 8.4 A maximum continuous current, with a 0.118 N·m/A torque constant.
- 10 arcsec backlash on the top two ratios Gear backlash is 20 arcsec at 51:1 and 81:1 and tightens to 10 arcsec at 101:1 and 121:1.
- 18 mm hollow shaft The bore matches the 60-frame modules, so cabling can run through a whole limb of mixed joint sizes on one routing scheme.
- Three fully specified builds 73 mm at 0.9 kg for the base unit, 91.5 mm at 1.11 kg for the extended -B body, and 73 mm at 0.99 kg for the -2E-EC.
- EtherCAT on the -2E-EC build That build keeps the 73 mm base length and adds a 16/18-bit encoder option with EtherCAT alongside CAN.
Description
The CRA-RI70-80 lifts the Ti5 line past 100 N·m: 69 N·m peak torque at the 51 ratio, 91 N·m at 81, 102 N·m at 101 and 108 N·m at 121, from a 0.9 kg base build. That is roughly 1.6 times the 60-frame's peak torque for about 0.17 kg more mass, which makes it the usual choice for the load-bearing joints — shoulders, hips, knees — of a human-scale limb.
It is the lighter of the two 70-frame modules. The CRA-RI70-80 and the CRA-RI70-90 share the same four ratios, the same torque and speed table, the same 500 W platform at 24–48 V with 6.1 A rated and 8.4 A maximum continuous current, the same 0.118 N·m/A torque constant and the same 18 mm bore. Mass is the separation: 0.9 kg here against 1.27 kg, 1.11 kg against 1.5 kg for the extended body, 0.99 kg against 1.3 kg for the EtherCAT build, with housings a half-millimetre shorter at each step. Their performance figures are identical, so picking between the two frames is a question of mounting envelope and moving mass, settled with the quotation.
Three builds are fully specified. The base CRA-RI70-80-PRO-2-XXX is 73 mm at 0.9 kg with a 16-bit encoder on CAN and 596.4 g·cm² rotor inertia. The -B build extends the housing to 91.5 mm at 1.11 kg and 746.7 g·cm². The -2E-EC build stays at 73 mm, weighs 0.99 kg, and adds a 16/18-bit encoder option with EtherCAT alongside CAN. A fourth designation, -B-2E-EC, completes the family, and its figures are confirmed with the quotation.
The module is an integration part, not a finished machine: one housing holding motor, gear stage, encoder and drive electronics, with a bore for cabling and a fieldbus for control. The links it moves, the controller that commands it and the power system behind it are the integrator's work.
Key Capabilities
- 69 to 108 N·m across four ratios: 51:1 gives 69 N·m peak at up to 77 RPM, 81:1 gives 91 N·m at 48 RPM, 101:1 gives 102 N·m at 40 RPM and 121:1 gives 108 N·m at 30 RPM.
- The lighter of the two 70-frame modules: Base build mass is 0.9 kg against 1.27 kg for the CRA-RI70-90, on identical torque, speed and electrical ratings.
- 500 W electrical platform: All builds run from 24–48 V at 6.1 A rated and 8.4 A maximum continuous current, with a 0.118 N·m/A torque constant.
- 10 arcsec backlash on the top two ratios: Gear backlash is 20 arcsec at 51:1 and 81:1 and tightens to 10 arcsec at 101:1 and 121:1.
- 18 mm hollow shaft: The bore matches the 60-frame modules, so cabling can run through a whole limb of mixed joint sizes on one routing scheme.
- Three fully specified builds: 73 mm at 0.9 kg for the base unit, 91.5 mm at 1.11 kg for the extended -B body, and 73 mm at 0.99 kg for the -2E-EC.
- EtherCAT on the -2E-EC build: That build keeps the 73 mm base length and adds a 16/18-bit encoder option with EtherCAT alongside CAN.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI70-80-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Relation to the CRA-RI70-90 | Same ratios, torque, speed and electrical tables; lighter frame |
| Gear Ratios | 51:1, 81:1, 101:1, 121:1 |
| Peak Torque | 51:1 — 69; 81:1 — 91; 101:1 — 102; 121:1 — 108 N·m |
| Max Allowable Torque at Average Load | 51:1 — 42; 81:1 — 58; 101:1 — 61; 121:1 — 61 N·m |
| Rated Torque at 2000 RPM Input | 51:1 — 32; 81:1 — 42; 101:1 — 50; 121:1 — 50 N·m |
| Peak Speed | 51:1 — 77; 81:1 — 48; 101:1 — 40; 121:1 — 30 RPM |
| Rated Speed at Half Rated Torque | 51:1 — 61; 81:1 — 38; 101:1 — 30; 121:1 — 25 RPM |
| Gear Backlash | 51:1 — 20; 81:1 — 20; 101:1 — 10; 121:1 — 10 arcsec |
| Rated Power | 500 W |
| Supply Voltage | 24–48 V |
| Rated Current | 6.1 A |
| Max Continuous Current | 8.4 A |
| Torque Constant | 0.118 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 18 mm |
| Length | 73 ±0.5 mm base; 91.5 ±0.5 mm -B; 73 ±0.5 mm -2E-EC |
| Mass | 0.9 kg base; 1.11 kg -B; 0.99 kg -2E-EC |
| Rotor Inertia | 596.4 g·cm² base; 746.7 g·cm² -B; 624.19 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Mass. The ratios, torque and speed tables, backlash, electrical ratings and 18 mm bore are the same on both; the 70-80 base build comes in at 0.9 kg against 1.27 kg for the 70-90, with its housings a half-millimetre shorter at each build. Their performance figures are identical, so the right frame for a given mounting is confirmed with the quotation.
Four: 51:1 at 69 N·m peak and up to 77 RPM, 81:1 at 91 N·m and 48 RPM, 101:1 at 102 N·m and 40 RPM, and 121:1 at 108 N·m and 30 RPM.
Allowable torque at average load is 42 N·m at 51:1, 58 N·m at 81:1 and 61 N·m at both 101:1 and 121:1, with rated torque at a 2000 RPM input of 32 to 50 N·m over the same span.
The -2E-EC build, with CAN or EtherCAT and a 16/18-bit encoder option, in the same 73 mm length as the base unit at 0.99 kg. The base and -B builds use CAN with a 16-bit encoder.
With the quotation. Its length, mass, inertia and encoder figures are confirmed in writing for that build.
It is offered by quotation. Build, gear ratio, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
